Sale!

Petrol Power Module Pre

Original price was: $1,244.00.Current price is: $895.00.

The Elitedrive Power Module will provide your engine with the maximum safe available level of power and torque while maintaining Vehicle Manufacturer’s all important air/fuel ratio’s for excellent reliability.
Because every Petrol Power Module is programmed specifically for your engine, based on a Dyno Derived tune, you’ll enjoy more power every time you come out of a corner, or take off from a green light.
Feel the power come in sooner and last for longer, as well as a shove in the midrange you’ll quickly get addicted to. Drive the car you always wanted by adding up to 30% More Power and Torque across the rev range.
 
Torque is what moves you and what makes your car respond when you put your foot down, so our tunes are not based on top end gains alone. We make sure the gains are generated throughout the rev range, especially focusing on midrange torque because this area of the rev range is where you spend the majority of your time driving.  When you put your foot down after install, there’s a difference in power felt everywhere.
 
Warning: This level of power is addictive!

RESULTS GUARANTEED

6 REASONS TO UPGRADE TO AN ELITE DRIVE THROTTLE CONTROLLER

Faster Engine Response

Eliminate Turbo Lag

Faster 0-100 Times

Use for competition

Simple – Reversible Installation

30 Day Money Back Guarentee

Your Elitedrive Petrol Power Module is programmed specifically for your engine and the wiring loom includes plugs that match perfectly with your connections.

There are no hardware upgrades required, simply install and the supplied setting will work 100% harmoniously with your vehicle.
These are a Plug & Play tuning solution that most people can install themselves. If you prefer a Drive in – Drive out solution, many of our dealers offer this service so check them out here –

ELITEDRIVE DEALERS

SAFELY UPGRADE YOUR POWER & TORQUE TODAY

Stronger Overtaking Mild to Maximum Faster Acceleration Faster Throttle Response 

Processor

Specific microcontroller
for automotive, IT processes
the optimal set-up for 
each load variation

FLASH MEMORY

Contains the specific software for the car on which the chip tuning box will be installed

SHELL

External case in ABS reinforced with 30% fiberglass, for maximum resistance. Impermeability IP69

Wiring

Original connectors with IP67 waterproofing, T4 wires, self-extinguishing corrugated coating

Petrol Power Tuning Module | Plugin Power | Elitedrive NZ

The Elitedrive Power Module will provide your engine with the maximum safe available level of power and torque while maintaining Vehicle Manufacturer’s all important air/fuel ratio’s for excellent reliability.

Dyno Developed gains

Simple Installation
Wiring Included

STEP 1​

Open the bonnet
Remove the plastic engine cover

STEP 12

Locate the Fuel Rail or MAF Sensor based on your instructions Unhook it and connect the original style plugs to those of the Power Module.

STEP 3

Locate the Boost Sensor
Unhook it and connect the original
style plugs to those of the Power Module

STEP 4

Refit the plastic engine cover
Installation complete.
Test Drive Time!

Start your journey