The Elitedrive Power Module will provide your engine with the maximum safe available level of power and torque while maintaining Vehicle Manufacturer’s all important air/fuel ratio’s for excellent reliability.
Because every Diesel Power Module is programmed specifically for your engine, based on a Dyno Derived tune, you’ll enjoy more power every time you come out of a corner, or take off from a green light. Feel the power come in sooner and last for longer, as well as a shove in the midrange you’ll quickly get addicted to. Drive the car you always wanted by adding up to 30% More Power and Torque across the rev range.
Torque is what moves you and what makes your car respond when you put your foot down, so our tunes are not based on top end gains alone. We make sure the gains are generated throughout the rev range, especially focusing on midrange torque because this area of the rev range is where you spend the majority of your time driving.  When you put your foot down after install, there’s a difference in power you’ll feel everywhere.
Warning: This level of power is addictive!

 

6 REASONS TO UPGRADE TO AN ELITE DRIVE POWER MODULE

Plug & Play Installation

Your Elitedrive Diesel Power Module is programmed specifically for your engine and the wiring loom includes plugs that match perfectly with your connections.

The wiring loom installs to your fuel rail and turbo boost sensor. This allows the Power Module to raise fuel rail pressure safely while simultaneously making up to 3psi more boost available. Because boost is raised, your air/fuel ratio’s remain standard and your hot Exhaust Gas Temps are taken care of by the increased exhaust flow from the boost increase.
This makes the Power Module a 100%  Plug and Play power solution requiring NO Hardware upgrades to operate

ELITEDRIVE DEALERS

The Elitedrive Power Module will provide your engine with the maximum safe available level of power and torque while maintaining Vehicle Manufacturer’s all important air/fuel ratio’s for excellent reliability.

SHOP NOW

Save Fuel with Elitedrive

WHY SAVE JUST 10%? WITH CAREFUL DRIVING YOU CAN SAVE 15%!

The Power Module creates more torque at lower revs, guaranteeing you savings. Driven with economy benefits in mind, this allows for changing gears sooner and using higher gears than usual.

STEP 1

Open the bonnet

Remove the plastic engine cover

STEP 2

Locate the Fuel Rail Sensor based on your instructions

Unhook it and connect the original style plugs to those of the Power Module

STEP 3

Locate the Boost Sensor

Unhook it and connect the original style plugs to those of the Power Module

STEP 4

Refit the plastic engine cover

Installation complete. Test Drive Time!

100% MADE IN THE UK
QUALITY & DESIGN
AT THE BEST PRICE

EXPRESS NZ COURIER
24 HOUR SHIPPING
WITH TRACKING NO#

EACH POWER MODULE
IS SPECIFICALLY PROGRAMMED
FOR YOUR VEHICLE

Start your journey