INTRODUCING A WORLDS fIRST HERE IN NZ
DIESEL
Introducing the New Elitedrive Diesel Advantage Module with Eco Plus.
An innovative solution designed for the modern diesel vehicle owner.
This state-of-the-art module combines advanced fuel management technology with our revolutionary Eco Plus system, tailored to enhance your driving experience. Optimized for performance and efficiency, the Diesel Advantage Module guarantees up to 15% savings per tank, reducing both fuel consumption and emissions. Experience the future of diesel technology today, and drive smarter, cleaner, and more efficiently with Elitedrive. Guaranteed Performance, Guaranteed Savings.
ARE YOU TIRED OF RISING
ROAD USER TAXES?
DIESEL PUMP PRICES?
EVERY TANK YOU FILL WE GUARANTEE UP TO 15% IN DIESEL SAVINGS
Discover the power of efficiency with the new Elitedrive Diesel Advantage Tuning System. Engineered to optimize your vehicle’s performance, our innovative system can unlock remarkable savings of up to 15% per tank.
By fine-tuning your diesel engine’s parameters, we ensure maximum fuel utilization without compromising on power. Experience enhanced mileage and cost-effectiveness on every journey, making your driving experience not just smoother, but smarter too.
The Perfect Combination
+
=
NOTHING SPEAKS LOUDER THAN REAL WORLD RESULTS
Vehicle used: 2022 LDV T60 2.0Ltr Diesel – LDV NEW ZEALAND
(Based on a 73Ltr Full Fuel Tank)
FACTORY OEM: 9.2L per 100km’s
ADVANTAGE ECO-PLUS 7.8L per 100km’s
FACTORY OEM: 793km’s p/tank
ADVANTAGE ECO-PLUS 7.8L per 100km’s
SAVINGS
SAVINGS
OVERALL SAVINGS
AMAZING INTRODUCTORY OFFER $1495
LIMITED TIME ONLY
FREE
Courier Delivery
FREE
$50 Petrol Voucher
Available For Over
Models
START HERE
Select your Vehicle Brand
Fuel Economy in a Diesel Engine Benefits of Bringing the Torque Curve Forward for Fuel Economy
In A Diesel Engine, Bringing The Torque Curve Forward Can Benefit Fuel Economy In Several Ways:
Efficient Combustion:
By optimizing the torque curve to provide more torque at lower engine speeds, the engine can operate more efficiently. This means that the engine can produce the required power with less effort, leading to improved fuel efficiency.
Reduced
Engine Stress:
When the torque curve is brought forward, it allows the engine to operate at lower RPMs for a given power output. Operating at lower RPMs reduces stress on the engine components, resulting in lower friction losses and improved fuel economy.
Enhanced Driving Experience:
Bringing the torque curve forward provides better low-end torque, which translates to improved drivability and responsiveness. This means that drivers can achieve desired speeds more easily without having to push the engine hard, leading to better fuel economy.
Maintaining Cruise Efficiency:
With a torque curve that peaks earlier, diesel engines can maintain higher gears at lower speeds while cruising, which contributes to fuel savings by reducing unnecessary downshifting and maintaining a more efficient operating range.
In conclusion, bringing the torque curve forward in a diesel engine offers multiple benefits for fuel economy by enhancing combustion efficiency, reducing engine stress, optimizing gear ratios, improving driving experience, and increasing cruise efficiency.
Simple upgrade - Massive Results
- Smoother Acceleration
- Guaranteed Fuel Savings
- Dyno Tuned Maps
- Requires No Hardware Upgrades
- Reprogram in Future
- Guaranteed Results
- Plug n Play Installation
- Tunes Based on Real Results
- Perfect Diesel Tuning Solution
- 5 Year Warranty
SIMPLE D.I.Y INSTALLATION
It's As Easy As 1..... 2.... 3....
SIMPLE PLUGIN
INSTALLATION
FILL UP AND
START YOUR ENGINE
DRIVE AND SAVE UP
TO 15% PER TANK
It just keeps getting better
introducing
Included with every advantage Module
Unwanted pedal movement results in wasted fuel
Vehicles experience various road surface irregularities as they travel, leading to minute up-and-down motions of the drivers foot. Consequently, drivers unconsciously adjust their foot pressure on the accelerator pedal to maintain vehicle speed, causing slight fluctuations in power output.
For instance, a driver aiming for a constant 50 kilometers per hour may unintentionally vary the requested speed between 45, 47, 51, and 53 kph within a second. These rapid deviations often go unnoticed by the driver but collectively contribute to substantial fuel consumption beyond the vehicle’s theoretical peak efficiency.
We have found in testing that unwanted pedal movements account for approximately 5% of excess fuel consumption in passenger cars, up to 8% depending on the driver. This translates to an average annual fuel cost of around $200 for an individual driver. Testing also revealed that these movements are most prevalent during stop-and-go traffic conditions and at low speeds.
In summary, unwanted pedal movements caused by road surface variations lead to fuel waste and reduced real-world mileage compared to the theoretical peak efficiency of a vehicle.
Introducing ECO-PLUS Enhancing Vehicle Efficiency
ECOPLUS is an advanced technological innovation designed to maximize vehicle mileage by electronically adapting to variations in power. This state-of-the-art system utilizes a sophisticated pedal signal correction mechanism, which significantly improves fuel efficiency and extends the driving range of vehicles.
It is particularly effective in vehicles equipped with electronic accelerator pedals, including electric cars, hybrids, and traditional gasoline-powered automobiles.
The technology ensures smoother acceleration and deceleration, leading to a more efficient use of energy and a reduction in fuel consumption, thereby supporting both economical driving and environmental sustainability.
-
Advanced Technology:
ECOPLUS integrates a sophisticated CPU to facilitate precise corrections.
-
Sensor Integration:
The system incorporates built-in sensors to monitor vehicle movement and track driver-pedal interaction by analyzing accelerator pedal positions.
-
Data Analysis:
Leveraging Elitedrive Technology, ECOPLUS processes sensor data in real-time to assess how road conditions impact driver behavior.
-
ECOPLUS Functionality:
Through electronic adjustments, ECOPLUS ensures a consistent power output by correcting the pedal signal promptly.
-
Seamless Operation:
ECOPLUS operates seamlessly in the background, enhancing fuel efficiency without compromising vehicle handling or safety.
Conclusion: ECOPLUS is a state-of-the-art solution designed to optimize vehicle performance and fuel economy while maintaining a smooth driving experience for users.
SIMPLISTIC DIY INSTALLATION
Unclip The Factory OEM Harness Plug From The Accelerators Throttle Assembly
Click The Factory OEM Harness Plug To The Eco-Plus Harness Supplied
Click The Eco-Plus Harness To Back To The Accelerators Throttle Assembly
A DEAL NOT TO MISS ON SAVE THOUSANDS ON FUEL
Experience a revolution in diesel efficiency with the EliteDrive Diesel Advantage Tuning Module, featuring our exclusive Eco-Plus technology! This simple installation is your gateway to extraordinary savings, slashing thousands of dollars off your diesel costs.
Harness the power of this groundbreaking, cutting-edge technology that pays for itself rapidly, allowing you to enjoy unmatched economic benefits. Don’t just drive—drive smarter, save big, and embrace the future of diesel performance today with EliteDrive!