The Elitedrive Power Module will provide your engine with the maximum safe available level of power and torque while maintaining Vehicle Manufacturer’s all important air/fuel ratio’s for excellent reliability.
Because every Petrol Power Module is programmed specifically for your engine, based on a Dyno Derived tune, you’ll enjoy more power every time you come out of a corner, or take off from a green light.
Feel the power come in sooner and last for longer, as well as a shove in the midrange you’ll quickly get addicted to. Drive the car you always wanted by adding up to 30% More Power and Torque across the rev range.
Torque is what moves you and what makes your car respond when you put your foot down, so our tunes are not based on top end gains alone. We make sure the gains are generated throughout the rev range, especially focusing on midrange torque because this area of the rev range is where you spend the majority of your time driving.  When you put your foot down after install, there’s a difference in power felt everywhere.
Warning: This level of power is addictive!

6 REASONS TO UPGRADE TO AN ELITE DRIVE POWER MODULE

Plug & Play Installation

Your Elitedrive Petrol Power Module is programmed specifically for your engine and the wiring loom includes plugs that match perfectly with your connections.

There are no hardware upgrades required, simply install and the supplied setting will work 100% harmoniously with your vehicle.
These are a Plug & Play tuning solution that most people can install themselves. If you prefer a Drive in – Drive out solution, many of our dealers offer this service so check them out here –

ELITEDRIVE DEALERS

The Elitedrive Power Module will provide your engine with the maximum safe available level of power and torque while maintaining Vehicle Manufacturer’s all important air/fuel ratio’s for excellent reliability.

STEP 1

Open the bonnet

Remove the plastic engine cover

STEP 2

Locate the Fuel Rail or MAF Sensor based on your instructions

Unhook it and connect the original style plugs to those of the Power Module.

STEP 3

Locate the Boost Sensor

Unhook it and connect the original

style plugs to those of the Power Module

STEP 4

Refit the plastic engine cover

Installation complete.

Test Drive Time!

100% MADE IN THE UK
QUALITY & DESIGN
AT THE BEST PRICE

EXPRESS NZ COURIER
24 HOUR SHIPPING
WITH TRACKING NO#

EACH POWER MODULE
IS SPECIFICALLY PROGRAMMED
FOR YOUR VEHICLE

Start your journey